MEP SHARK 332-1 SXI EVO

•  
  Número de referência 1108-66328

  Horas de serviço Não especificado

• Fornecedor

  WMT GmbH & Co.KG
  Siemensstraße 1
  46342 Velen-Ramsdorf

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Máquinas de serrar, limar e separar

• Tipo de máquina

  Serras de fita horizontais

• Produtor

  MEP

• Dados técnicos

  cutting diameter

  300 mm

  capacity 90 degrees: flat

  330 x 260 mm

  capacity 90 degrees: square

  260 x 260 mm

  capacity 45 degrees: flat

  270 x 200 mm

  capacity 45 degrees: round

  260 mm

  capacity 45 degrees: square

  250 x 250 mm

  capacity 60 degrees: flat

  170 x 170 mm

  capacity 60 degrees: square

  170 x 170 mm

  capacity 60 degrees: round

  180 mm

  turning speed range:

  40 / 80 m/min

  dimensions of saw-band

  3320 x 27 x 0,9 mm

  engine output

  1,5 / 1,8 kW

  weight

  670 kg

• Descrição

  Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with
  semi-automatic-dynamic, manual function, has a MEP-28 control
  for miter cuts from 45° right to 60° left.
  Some features:
  New centralized switch console on an articulated arm.
  Low voltage control panel:
  Polyester membrane keyboard with thermoformed highlighted
  Push buttons and actuation control signal.
  Display to show:
  * Diagnostics (messages in the user language)
  * Alarms (description of alarm causes)
  * State of inputs and outputs
  * Counting cuts
  * Time taken for the cut made
  * Current consumption of the saw blade motor
  * Saw blade tension
  * Blade speed
  * Numerical display of head position.
  Switch handle IP55 of manual 24V cycle.
  Complete program of all special cutting cycles.
  Identification of other possible special cutting cycles for special ones
  Applications
  New, latest generation hydraulic control unit, extremely powerful
  and with low energy consumption.
  Turntable (on roller bearings of 420 mm with preloaded thrust bearings
  assembled).
  Double belt speed (40/80 m/min.) with control
  Intended to accommodate an electronic inverter for the
  Continuous regulation of the belt speed from 20 to 90 m/min.
  Stroke of the saw bow can be programmed directly from the control panel
  Adaptation to the cutting material.
  Clamping device can be moved laterally to the left and right
  Quick release vice.
  Manually operated strap tension control with display on the screen
  electronic converter.
  Base designed to completely contain the coolant,
  even with maximum angle cuts.
  The coolant pan (provided with an electric pump for lubrication and
  Cooling of the saw band) and the chip drawer (can be replaced by a
  Chip conveyor to be replaced - see special accessories) are in the base
  frame
  built-in.
  Preparation for installing the minimum blade lubrication kit
  (Optional, in addition to the conventional standard lubrication with
  emulsion oil.
  Chip clearing brush.
  The machine is intended for pallet truck transport.
  Adjustable length stop for cuts of the same length
  Material support arm with roller for attaching the loading platform
  Bimetal saw band for solid and profile material.
  Tools and instructions for use in the respective user language.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado