GLEASON PHOENIX 200 HG

•  
  Número de referência 1049-328540

  Ano de construção 1997

  Horas de serviço Não especificado

• Fornecedor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Máquinas de corte de engrenagens

• Tipo de máquina

  Centros de maquinagem de engrenagens cónicas

• Género de máquina

  Máquinas de retificação de engrenagens cónicas

• Produtor

  GLEASON

• Dados técnicos

  max. wheel diameter

  215 mm

  gear width

  40,65 mm

  max. module

  total power requirement

  20 kW

  weight of the machine ca.

  10 t

• Descrição

  Max. external Ø of workpiece 215 mm
  Tooth profile, height x width 16 x 40.65 mm
  No. of teeth 5 - 200
  Max. tooth ratio 1 : 10
  
  Grinding wheel Ø 51 - 190 mm
  Grinding wheel speeds 1,000 - 6,000 rpm
  
  X Axis (horizontal) 152 mm
  Y Axis (vertical) 178 mm
  Z Axis (slide base plate) 304 mm
  Distance from middle of machine to middle of workspindle 115 mm
  Axial speed 125 mm/sec
  Workpiece speeds 0 - 30 rpm
  
  Workspindle bore, conical 3 29/32 inch
  
  Total electrical load 20 kW - 380 V - 50 Hz
  Weight, approx. 10,000 kg
  
  Accessories / Special Features
  
  * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
  * Extensive coolant equipment with filter system, band filter, etc.
  * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
  * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.
  
  
  Condition : Very good - machine can be inspected here under power
  Delivery : Ex stock, as inspected
  Payment : Net, after conclusion of contract
  
  Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado