Filtro de pesquisa
Filtro de pesquisa
Produtos
Fornecedor
Categorias
Fazer
Produtos ()
Categorias ()
Comerciantes ()
Fabricante ()
REISHAUER RZP 200
Pedir informações sobre esta máquina
Asking price
- Número de referência 1049-053024Ano de construção 1986Horas de serviço Não especificado
-
Fornecedor
Categoria principal
Máquinas para trabalhar metaisCategoria
Máquinas de corte de engrenagensTipo de máquina
Maquinação fina de engrenagensGénero de máquina
Máquinas para retificação de flancos de dentesProdutor
REISHAUERDados técnicos
- max. wheel diameter
- 0 mm
- gear width
- 120 mm
- max. module
- 3
- min. module
- 1
- total power requirement
- 20 kW
- weight of the machine ca.
- 7,5 t
- dimensions of the machine ca.
- m
Descrição
5 machines in stock,
YOM: between 1986 and 1990
Gear Æ, min./max. 55 / 120 mm
Gear Æ for shaft-formed parts 80 mm
Module (pitch 25.4 - 8.5) 1 - 3
No. of teeth, min./max. 13 / 80
Pressure angle 14 - 30 °
Helix angle, max. 40 °
Workpiece clamping length 145 - 420 mm
Grinding worm Æ 300 - 400 mm
Grinding worm width 25 - 40 mm
Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm
Feed range 0.4 - 4 mm/rev
Total electrical load 20 kW - 380 V - 50 Hz
Weight 7,500 kg
Accessories / Special Features
* REISHAUER Electronic Control = Easy programming of workpiece
parameters and grinding process.
* Automatic workpiece handling system for shaft-formed parts,
approx. 350 mm long, including hydraulic loading and unloading
device. Fully automatic production is possible.
* Profile correction is possible for height and width crowning.
* Separate hydraulic unit. * Separate switch cabinet.
* Fully automatic profiling with a swivable diamond gear mounted
on a shaft corresponding to the workpiece. Dressing intervals
can be preset, with compensation.
Price, ex stock, each DM 245,000.--
These machines are very suitable for grinding tooth flanks on large
series of helical gears, with or without profile modification at a
minimum cost. Separate electronically controlled drive of grinding
worm and workpiece results in high precision and good surface quality
of gears. Constant speed is controlled by an angular decoder.
Grinding infeed is possible for the full profile depth as well as by
a preset additional forwards and backwards movement of workpiece.
Both flanks are continuously meshed and ground. Profile corrections
during dressing process are made by the same method (by a diamond
gear corresponding to the workpiece). All functions are controlled by a
microprocessor. Code numbers for various errors are displayed.
This ad was created with MODUL MWS - the software solution of LogoTech.Acessórios
Estado
Usado