DMU 50 (Reference-Nr. 011192)

•  
  Número de referência 011192

  Ano de construção 2022

  Horas de serviço Não especificado

• Fornecedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Centros de maquinagem

• Tipo de máquina

  Centros de maquinagem (universais)

• Produtor

  DMG MORI

• Comando

  Heidenhain

• Descrição

  
  

  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  General
  Universal Milling Machine; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Type of main drive	AC
  Drive power (100% DC)	16 kW
  Drive power (40% DC)	21 kW
  Speed range	20 - 15000 rpm
  Spindle taper	SK40 Tool holder DIN ISO 7388-1-A
  Clamping System	DIN ISO 7388-3-A, AD
  Feed rate longitudinal/transverse/vertical	-42000/-42000/-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Floor space/Weight
  Dimensions (L x W x H)	2,85 x 2,67 x 2,75 m
  Weight approx.	7950 Kg

• Especificação

  
  

  Direct measuring system	Direct path measuring system
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Tool magazin 120 pockets	Tool magazine 120 places SK40 Vertical chain with double gripper incl. set up station for tool loading
  Package ICS/swarf conveyor 600 L (aluminium)	Swarf conveyor scraper type, with wedge wire screen and suction pump Internal coolant supply Papertype-Filter 40 Bar // 580 psi Tank capacity: 600l // 158,5 gallon incl. cabin roof, rotary joint in spindle, Double cartridge filter 50 µm (recommended fo
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Mechanical Preparation Oil-mist separator	Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø 200mm
  Infrared measuring probe PP60 optical	Infrared touch Probe make Renishaw PP 60 optical (OMP 60)
  Laser tool measuring BLUM DIGILOG	Laser tool measuring Blum DIGILOG fix mounted at machine column modified construction, note interference contour! Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Door drive for working area door	Door drive for working area door electrical door drive, Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents Remark: Not usable for automation!
  Standard Automation Interface	Automation interface according to DECKEL MAHO Standard consisting of: Interface (Profibus) via M65 Automatic loading door Working table with 4-channel rotary joint
  Actuation zeropoint clampingsystem EROWA	Pneumatic actuation zero point clamping system EROWA 2 active pneumatic channels pneumatic release pressure 8 bar (actuation of other clamping systems only with prior consultation of Technical Sales!)

• Estado

  Usado