SPRINT 65 - 3T (Reference-Nr. 080154)

•  
  Número de referência 080154

  Ano de construção 2022

  Horas de serviço Não especificado

• Fornecedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Tornos

• Tipo de máquina

  Tornos de torre e tornos automáticos

• Produtor

  DMG MORI

• Comando

  Fanuc

• Descrição

  
  

  General
  Two-spindle turning centre - 3 cross slides - 3 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - Y-axis on slide 1-2-3 - chip conveyor - workpiece-unloading; Control: Fanuc 31i CELOS
  MAIN SPINDLE
  Bar diameter max.	65 mm
  Speed max.	5000 rpm
  Drive power main spindle	22 kW
  COUNTER SPINDLE
  Bar diameter max.	50 mm
  Speed max.	5000 rpm
  Drive power second spindle	18 kW

• Especificação

  
  

  Software for sister tools management	Software for the sister tools management for CNC Fanuc
  Software for tool life monitoring	Load Monitor: Software for the tool life monitoring Including dynamic representation of the tool stress NOTE: Installing this option could impact performance on workpiece cycle time
  Adjustable pressure for counterspindle	Adjustable pressure for clamping element of counter spindle with the possibility of selecting from CNC two different closing-pressure
  Coolant system emulsion 980l, 8/20 bar, chiller	Additional charge for coolant system for emulsion (max. 3 cSt at 40°C) with 980 litre tank, 40 micron paper filter installation, 4,5 kW chiller to cool cutting liquid, 8 bar washing pump and 20 bar tool refrigeration pump
  Ext. jaws clean by main and countersp.	Jaws-cleaning with coolant from the external of main and counterspindle
  Transport belt	Transport belt for finished workpieces outside the machine
  Collet applation size 65 without axial-movement	Collet application size 65 without axial movement Diameter max 65 mm Hexagon max 56 mm Square max 46 mm
  Collet applation size 65 without axial-movement	Collet application size 65 without axial movement Diameter max 65 mm Hexagon max 56 mm Square max 46 mm
  Collet change device size 65	Manual collet-change device for collets size 65
  3 x C1 Tool holder	3 x C1 tool holder for external machinings according to DIN 69880 (VDI 30) pressure max. 80 bar
  Cutting tool holder	Cutting tool holder with junction according to DIN 69880 (VDI 30) pressure max. 80 bar
  4 x Drill/Boring bar holder with Trifix, Ø 32	4 x Drill-boring bar holder with TRIFIX junction diameter 32 mm (VDI 30) external/internal coolant pressure max. 80 bar
  4 x Radial driven unit, 1:1, ESX/ER 25, e. cool.	4 x Radial driven unit (speed max 12.000 rpm) for milling or drilling operations with collet type ESX/ER 25, gear ratio 1:1, external coolant, pressure max. 80 bar, (VDI 30)
  Radial driven unit, 1:1, ESX/ER 25, e./i. cool.	Radial driven unit (speed max 12.000 rpm), for milling or drilling operations with collet type ESX/ER 25, gear ratio 1:1, external/Internal coolant, pressure max. 80 bar, filtering <50 microns (VDI 30)
  4 x Axial driven right, 1:1, ESX/ER 25, e./i. cool.	4 x Axial right driven unit (speed max 7.000 rpm), for milling or drilling operations with TRIFIX(?), collet type ESX/ER 25, gear ratio 1:1, external/internal coolant, pressure max. 80 bar, filtering <50 microns (VDI 30)
  2 x Radial driven unit, 1:1, Ø 20, e./i. cool.	2 x Radial reinforced driven unit (speed max 6.000 rpm), for milling or drilling operations junction diameter 20 mm, gear ratio 1:1, external/internal coolant, pressure max. 25 bar, filtering <50 microns (VDI 30)
  Axial driven right, 1:1, Ø 20, e./i. cool.	Axial right reinforced driven unit (speed max 5.000 rpm), for milling or drilling operations with TRIFIX(?), junction diameter 20 mm, gear ratio 1:1, external/internal coolant, pressure max. 70 bar, filtering <50 microns (VDI 30)

• Estado

  Usado