PFAUTER P 630

•  
  Número de referência 1058-25156

  Ano de construção 1975

  Horas de serviço Não especificado

• Fornecedor

  EMUK GmbH Werkzeugmaschinen
  Im Niedersand 44
  76877 Offenbach an der Queich

  Germany

  

• Categoria principal

  Máquinas para trabalhar metais

• Categoria

  Máquinas de corte de engrenagens

• Tipo de máquina

  Máquinas de fresar engrenagens

• Género de máquina

  Máquinas de fresar engrenagens verticais

• Produtor

  PFAUTER

• Dados técnicos

  max. wheel diameter

  630 mm

  gear width

  425 mm

  table hole

  125 mm

  clamping table

  550 mm

  max. module

  10

  axial-feeds

  0,40 - 6,80 mm/U

  radial feeds

  0,10 - 1,76 mm/U

  dist. cutter spindle - workpiece spindle

  50 - 425 mm

  no. of teeth

  min. 8

  milling cutter dia. x width

  192 / 215 mm

  shifting

  200 mm

  main drive motor

  7,5 kW

  total power requirement

  22,5 kVa

  weight of the machine ca.

  8,2 t

• Descrição

  Machine equipment:
  - Universal milling head with tangential displacement
  - Pressure reducing valve for counterholder
  - Magnetic chip transport
  
  --> Working range <--
  
  --> Largest module to be milled (in steel 600 N/mm²): 10 mm
  
  --> Straight gear teeth:
  --> Largest workpiece diameter: 630 mm
  --> Largest axial slide travel (Z-axis): 425 mm
  --> Smallest number of teeth to be milled: 8
  
  --> Dimensions <--
  --> Diameter of workpiece table: 550 mm
  --> Diameter of table bore: 125 mm
  --> Diameter of workpiece mandrel: 36 mm
  
  --> Largest milling cutter that can be clamped:
  --> Diameter: 192 mm
  --> Width: 220 mm
  --> Diameter of milling cutter mandrels: 32 mm
  
  --> Centre distance between milling cutter and workpiece:
  --> Maximum distance: 425 mm
  --> Minimum distance: 50 mm
  --> Drive taper for cutter mandrels: Morse taper 5
  --> Maximum cutter displacement: 200 mm
  
  --> Speeds and feeds <--
  --> Cutter speeds: 45 - 280 rpm
  --> Axial feed (Z axis): 0.40 - 6.30 mm/rev
  --> Radial feed (X axis): 0.10 - 1.60 mm/rev
  --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev
  
  Translated with DeepL.com (free version)
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado